Vibrating knife changing knife and taking knife tutorial

1.The vibrating knife takes the knife/step gathering
1.Make sure the device is powered on.
2.Click Back to Origin on the operation screen.
3.Wait for the device to return to the mechanical point.
4.Loosen the fixed cutter head nut to the left, one hand down, one hand up, hold the knife handle, and force the knife out vertically up/down to install the knife.
5.Precautions for blade installation
(1)The blade is aligned with the screw.
(2)The screw position is aligned with the cutter cap positioning post.
(3)When the cutter head is installed, the direction of the blade is towards the Y-axis beam.
2.The vibrating knife change steps
1.Go to the job page.
2.Change the value in the figure to 500 and press ENTER to confirm.
3.Point W axis rotates once to the right.
4.Turn the blade to face the control panel to loosen the screws and change the blade.
When IBON technicians come to train and install the machine, each step will be carefully explained to you, and I also hope that you can work safely in strict accordance with the operation requirements of the machine, if you encounter other problems, then contact IBON after-sales technicians at any time.