About the vibrating knife cutter knife depth operation page tutorial details

(Detailed drawings of worksheets are compared by number)
1: The coordinate value of the device
2: Movement in the Y- direction
3: Movement in the direction of X+
4: Movement in the X-direction
5: Movement in the Y+ direction 
6: The Z-axis is lowered to the tool setting position
7: Try cutting to the left
8: Switching value (5mm 1mm 0.1mm 0.03mm)
9: Try cutting to the right
10: Z-axis according to the set value
11: Downward according to the Z-axis of the set value
12: Unsave the tool set
13: Save the tool set
14: Subtract by the specified value (Z-axis actually up, note 1)
15: Subtract by the specified value (Z-axis actual downward note 1)
Tips: This tutorial is only for users who have purchased Airborne vibrating knife cutting equipment. In the actual operation process, please choose according to your actual situation to avoid errors. If there is any other situation, you can contact the after-sales department of IBON for technical communication and guidance.